28SI Alternator Installation Instructions

March 03, 2017

The 28SI Series of Delco alternators is being used as original equipment as well as replacements for the the older 21/22SI, 23SI, 24SI and other SI Series alternators. The 28SI's feature higher output ratings, three mounting options and remote sense technology. 

The following link is the Delco 28SI Alternator Installation Instructions:

28SI Alternator Installation Instructions




Leave a comment


Also in Tech

Voltage Set Points

September 07, 2017

The voltage set point is the the voltage an alternator will charge at while running. This is set by the regulator in most cases, but....

Continue Reading

7940-7100: 16-19mm (3/4) Wide Belt Conversion Pulley

June 27, 2017

Some agricultural, industrial, and marine applications run a particularly wide V belt. When replacing original generators or alternators....

Continue Reading

Massey Ferguson TO-20, TO-30 12V Starter Upgrade

April 28, 2017

On the older Massey Ferguson TO-20 and TO-30 tractors, it is common to see the original 6V system upgraded to a 12V system....

Continue Reading